Becker MAP PILOT User Manual

39
>>> NAVIGATION MODE
> USE
> FR
> ES
Entering/deleting a stopover
With this function, you can enter a stop-
over or delete an entered stopover.
> In the route guidance menu, select
Add
stopover
.
You can now enter a destination as a stop-
over as described in “Destination input”
on page 20. You also have the option of
selecting a destination in the last destina-
tions using
Select from last destinations.
Once you have entered the desired stop-
over, the route is recalculated.
The entered stopover is marked on the
map as a red flag.
Deleting a stopover
> In the route guidance menu, select
De-
lete stopover
.
The stopover is deleted. The system per-
forms a route recalculation.
Setting route options
You can modify the route options (route
selection etc.) during route guidance.
> In the route guidance menu, select
Route options.
> Set the route options as described under
“Route options” on page 46.
After a change, the route is recalculated.
Skipping a destination
If a planned route with a number of desti-
nations is active, you can delete the cur-
rent destination of the route. Route guid-
ance to the next destination will then be
initiated.
This might be necessary if, for example, a
destination was not driven to directly.
Otherwise the Becker® MAP PILOT will
attempt to guide you to the current desti-
nation.
> In the route guidance menu, select
Next
destination
.
Route guidance to the next destination
will be initiated.
Muting announcements
You can mute the navigation system an-
nouncements.
> In the route guidance menu, switch
Mute on or off .
My Route
> Select My route in the map toolbox.
The My Route menu appears.
Note:
The following functions are only avail-
able when route guidance is active.

Becker MAP PILOT Specifications

General

Connectivity	USB
Voice Guidance	Yes
Bluetooth	No
Compatibility	Mercedes-Benz vehicles
Features	Speed limit display
Update Method	USB