34
NAVIGATION MODE >>>
> USE
> FR
> ES
Taking announcements into con-
sideration when calculating
routes
Your Becker® MAP PILOT can take traf-
fic announcements into consideration
when calculating a route. You have the
option of setting this function to automat-
ic, manual or never under “TMC settings”
on page 50.
Automatic recalculation
If your route is affected by a traffic prob-
lem, the Becker® MAP PILOT checks
whether a diversion to bypass the problem
is feasible. If a diversion is feasible, a de-
tour is calculated and you are guided via
the detour.
Manual recalculation
If a traffic announcement affects your
route, a window with detailed informa-
tion on the traffic announcement appears.
By selecting
Detour you can specify
whether or not the message is to be taken
into account in the route calculation.
You can change your chosen setting at any
time in the message list.
If after the selection of
Detour the
Becker® MAP PILOT determines that an
expedient alternative route is possible, the
following display appears.
The display provides you with an over-
view of the alternative route calculated.
The red route or route marked purple for
an obstruction shows the previous route.
The route marked green displays the alter-
native route calculated. In the upper sec-
tion of the display, you can see for the pre-
vious route and the alternative route the
distance to be traveled and the estimated
journey time.
> Select the desired route.
Note:
A detour is not generally calculated when
you select Detour. This is only done
when it is feasible in terms of time savings
and the route to be driven.
To Next Page
Loading...
Need help?
General
