Becker MAP PILOT User Manual

29
>>> NAVIGATION MODE
> USE
> FR
> ES
Entering a POI directly by phone number
> In the POI menu, select
POI search by
phone number
.
> Enter the phone number (or a part of it)
of the desired point of interest.
When sufficient numbers have been se-
lected the Becker® MAP PILOT will au-
tomatically switch to a list from which you
can select the point of interest. However,
you can switch to the list before this by
pushing the rotary control/push button
downwards. You can then select the point
of interest from the list.
> Select the desired destination from the
list.
> Select
Start guidance to begin route
guidance to the point of interest straight
away.
Selecting a destination from the
map
You can select a destination straight from
the map.
> Select
Select on map from the destina-
tion input menu.
The map display appears.
> Search for the desired position.
> Press the rotary control/push button.
A list of possible destinations, an address
or geographical coordinates are then dis-
played according to the position of the
cursor.
> Select
Start guidance to begin route
guidance to the destination straight
away.
Coordinate entry
You can also enter your destination using
geographical coordinates.
> Select
Enter geo-coordinates from the
destination input menu.
Note:
The search radius is limited to 125 miles
around your current position.
Note:
Turn the rotary control/push button to
change the scale of the map display.
Push the rotary control/push button to
move the displayed cursor to the desired
position.
Note:
Push the rotary control/push button to
the right for further control options.
1
2
3

Becker MAP PILOT Specifications

General

Connectivity	USB
Voice Guidance	Yes
Bluetooth	No
Compatibility	Mercedes-Benz vehicles
Features	Speed limit display
Update Method	USB