61
NAVIGATIONAL MODE >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
The Factory settings key
You can use the Factory settings configu-
ration window to cancel all new settings
and reset the system to the factory set-
tings.
> Press
Factory settings in the settings
menu.
The Factory settings settings menu
appears.
> In order to reset the Traffic Assist to the
factory settings, press
Yes.
What is dynamic route guid-
ance?
Dynamic route guidance calculates the
route, while taking into account current
traffic announcements.
Traffic announcements are transmitted by
radio stations via the TMC (Traffic Mes-
sage Channel) in addition to the radio
programme and are received and analysed
by the navigation system. Receiving traffic
announcements is free of charge.
A continuous check is made for the pres-
ence of relevant messages for the selected
route. However, traffic problems are also
shown on the map even if route guidance
is deactivated.
If these continuous checks determine that
a traffic announcement is relevant to route
guidance, the unit will automatically re-
calculate a new route to the destination
(See “The button Load map” on
page 60.).
Note:
Dynamic route guidance is not available
for all countries (currently only Belgium,
Germany, Denmark, France, Italy, The
Netherlands, Austria, Sweden, Switzer-
land and Spain).
TMC reception must be available in or-
der to activate dynamic navigation and
the functions described below.
Note:
As the traffic announcements are trans-
mitted by radio stations, we cannot as-
sume responsibility for the completeness
or accuracy of the announcements.
Austria: The location and event code was
made available by ASFINAG and BM-
VIT.
To Next Page
