Becker Traffic Pro 4720 - Starting Navigation and Menu Navigation

85
1DYLJDWLRQRSHUDWLRQ
6HOHFWLQJQDYLJDWLRQ
Press multifunction button.
The main navigation menu appears after this display.
1RWH The navigation CD must be loaded when starting
navigation operation for the first time.
If the navigation system has not yet been calibrat-
ed, a calibration journey is prompted (see Installa-
tion Guide).
A navigation CD with the data for the destination
country is required for navigation operation.
The navigation CD must be inserted to start the
route calculation. During the calculation, the
prompt
 flashes on the display. Once the calcu-
lation has been completed, the prompt
 extin-
guishes, the navigation CD can be removed and an
audio CD can be inserted.
When entering destinations, driving off should be
delayed until the prompt
 disappears.
0DLQQDYLJDWLRQPHQX
Selection from
 !!,
 !Y&,
YYY,
 ! !! ,
can be made by turning the right rotary control , and con-
firmed by pressing the right rotary control .
•
 !!
accesses the entry menu for the destination.
See ”Entering destination” on page 86.
•
 !Y&
contains destinations which have been stored previously.
See ”Destination memory” on page 107.
•
YY
Menu for the selection of special local and interregional
destinations and special destinations nearby. Special des-
tinations are e.g. petrol stations, airports or hospitals See
”Special destinations” on page 107.
1DY
#! !#!B
  #!
 !Y&

YY