95
1DYLJDWLRQRSHUDWLRQ
For final storage in the destination memory, either route guid-
ance must be started or the program must be switched to new
destination entry by selection of
$ !Y.
'HOHWLQJVWRUHGGHVWLQDWLRQV
Select destination memory (see page 107).
Select the destination to be deleted using the right rotary con-
trol and press the multifunction button.
'HVWLQDWLRQPHPRU\IXOO
Occurs when the destination memory is full.
Select either
! (to jump to the destination memory in
order to delete a destination) or
(to cancel saving).
5RXWHJXLGDQFHFDOFXODWLRQ
The message "Calculating route" indicates that the distance is
being calculated, which may take several seconds.
After the first route guidance announcement, the prompt
flashes on the display until the route has been completely cal-
culated. When entering a destination, driving off should be
delayed until
no longer flashes.
5HFDOFXODWLQJWKHURXWH
If the current route is not followed due to road blocks, diver-
sions, unintentional driving in the wrong direction or failing
to observe the recommendations, the system immediately cal-
culates a new route. During this recalculation, $"! is
displayed.
To Next Page
Loading...
