Becker Traffic Pro 4720 - TMC Station Management

127
5DGLRPRGH
,QWHUUXSWLQJ73DQQRXQFHPHQWV
During a TP announcement, briefly press the button.
The announcement currently being broadcast will be
interrupted and the system will automatically return to the
previously selected mode.
73DQQRXQFHPHQWYROXPH
Activate the TP menu. Press the multifunction button.
Using the right rotary control , four different settings
(
 - ) can be selected. This means that the volume can be
raised to a fixed value according to the setting.
• Setting
 - no volume increase
• Setting
 - slight volume increase
• Setting
 - medium volume increase
• Setting
 - large volume increase
6ZLWFKLQJ70&RQRII
1RWH You can find further information on TMC under
“Dynamic navigation with TMC” auf Seite 101.
Activate the TP menu.
6ZLWFKLQJRQ:
Press the multifunction button repeatedly until
!
65
is displayed.
If TMC is switched on, a traffic programme transmitter
cannot be selected freely. A TMC station is selected by the
unit, provided one can be received. This transmitter then
corresponds to the traffic programme transmitter.
6ZLWFKLQJRII
Press the multifunction button repeatedly until
!
6--
is displayed.
If TMC is switched off, a traffic programme transmitter can
be selected freely.
1RWH Dynamic navigation functions (dynamic route,
traffic information) cannot be selected or called
up.
73
#63
EM
!7 ;( #63 !4*
,+
!7 ;( #63 !4*
!4*
!4*