119
5DGLRPRGH
'\QDPLFDXWRVWRUH)0'$6
In radio menu mode, press the multifunction button re-
peatedly until
,,2<(3Y or ,,2(4, is dis-
played.
In
mode, the receivable transmitters are displayed
according to the setting via the multifunction buttons.
Set the desired transmitter by pressing the button directly be-
low the abbreviated station designation. If the selected trans-
mitter broadcasts several programmes/regional programmes,
a submenu is automatically displayed to select the desired
programme.
If a programme has previously been selected that belongs to
the particular transmitter chain, the last stored programme en-
try will be automatically selected.
The multifunction button indicates that the button can
be pressed for displaying and selecting additional transmit-
ters.
To indicate those transmitters not easily identified due to the
display of advertisements or news, the abbreviation
S...
S' ( = Local) is used. This prevents constant switching in
the lower display line. When a transmitter is selected, it is in-
dicated by a star (e.g.
Q).
When using the unit for the first time, or following interrup-
tion of the power supply, allow for a brief waiting period so
that the receiver can evaluate the transmitter signals. The dis-
play will appear incrementally as the evaluation progresses.
)0'$6WUDQVPLWWHUVHDUFK
Turn the right rotary control to the left/right. The radio dis-
plays the receivable and identified transmitters in descending/
ascending order.
7UDQVPLWWHUVHDUFK0:/:6:
In the desired waveband ($, $, $), turn the right rotary
control to the left/right. The radio searches for reception
frequencies in descending/ascending order of frequency.
4
To Next Page
Loading...
