Becker Traffic Pro 4720 - Repeating a Track; Number of Tracks and Total Playing Time; Temperature Protection Circuit

131
&'PRGH
5HSHDWLQJDWUDFN
By pressing the multifunction button the track repeat
function is switched on. The prompt
7; is displayed inverse-
ly.
After pressing the multifunction button again, the track
repeat function is switched off.
1XPEHURIWUDFNVDQGWRWDOSOD\LQJWLPH
In CD mode, press the button. By pressing the multifunc-
tion button the elapsed time for the tracks already
played is displayed briefly.
By pressing the multifunction button the number of
tracks and the total playing time of the current CD are dis-
played briefly.
7HPSHUDWXUHSURWHFWLRQFLUFXLW
A temperature protection circuit is utilised in this unit in order
to protect the laser diode against overheating.
When the protection circuit is requested,
!,47 is displayed
for 8 seconds and the unit switches back to radio operation.
The single CD operation can be requested again after a short
cooling phase. However, if the temperature is still too high,
the unit again switches back to the previously selected signal
source.
7;
/ (UP
5+7; LM LM +*
MOT

P
7;
&'
!92
MT/ (0P
!92 !;3
!;3