© BEKA 201 !6 All rights reserved
BAL2185_PICO_with_PICOtroniX1_PICOtronic_0816_EN
10.4 Installation position of pump elements
Differenttypesof pumpelements can beinstalled in thecentral lubricationpump PICO (see7.4 pump elements).
Fig.47:
The pump elements PE-60 F, PE-120 F, PE-170 F and PE-120 FV can be screwed into pump outlets No 4 and No 10 (see
fig.47).
Thepump elementsPE-5 to PE-50can be screwedinto pumpoutletsno. 1to no. 3and no. 5to no.9(see fig.47).
Remove the screw plug by means of a hex keyAF10 for outlets no. 4 and no. 10 (see fig. 47) and for outlets no. 1 to no. 3
andno. 5to no. 9(see fig. 47)AF 6from the pumpoutlet, whereyou want toscrew in thepump element.
Changethe sealings(delivered with pumpelement) to avoidthat damagedsealings are reused.
1
2
3
4
5
10
6
7
8
9
To Next Page
Loading...
