© BEKA 201 !6 All rights reserved
BAL2185_PICO_with_PICOtroniX1_PICOtronic_0816_EN
Check the surfaces temperature of the central lubrication pump as a possible heat transfer bears the risk of
burns.Wearheat resistantProtective gloves!
Open flame and fire are strictly forbidden during maintenance,inspection andrepairdue tofire hazard.
3.6 Unauthorized modification of spare parts
Modification, repair and alterations of the central lubrication pump are only accepted after manufacturer
feedback. Original spare parts and authorized accessories from the manufacturer contribute to safety. The
use of other parts can result in the loss of any liabilities for the resulting consequences. BEKA does not
assumeliability forparts that areretrofit by theoperator.
3.7 Inadmissible modes of operation
The operational safety of the central lubrication pump is only guaranteed for appropriate application as indicated in the
operatingmanual. Neverexceed or fallbelow the limitvalues, asstated in thetechnical data.
3.8 Electrostatic discharge
Avoid electrostatic discharge! There are electronic components integrated into the central lubrication pumps
which might be destroyed by electrostatic discharge. Observe the safety precautions against electrostatic
discharge according toDIN EN61340-5-1/-3. Ensure thatthe environment(persons, workplaceand packing)
iswell groundedwhen handling thesecentral lubrication pumps.
3. General hazard note - residual risk9
All components are designed according to valid regulations of the construction of technical systems in
regards to operational safety and accident prevention. Independently from this the use can lead to hazards
for the user or third parties as well as for other technical facilities. Therefore the central lubrication pump may
only fulfill its intended use in a . This has to happen intechnically acceptable and faultless condition
adherence of the according safety regulations and under observance of the operating manual. Inspect the
central lubrication pump and its attachment parts and them for possible orregularly check damage
leakages. Liquids escape high pressure leakycould under frompressurized componentswhich become .
To Next Page
Loading...
Need help?
General
