EasyManua.ls Logo

Belanger SpinLite - Introduction; Manual Overview

Belanger SpinLite
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SpinLite® Full Side Washer
1MANUL961 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 7
Introduction
Thank you for your purchase of the Belanger, Inc. SpinLite® Full Side Washers. This manual will familiarize
you with the SpinLite® Full Side Washer installation, operation, and maintenance.
Both the driver and passenger side SpinLite® Full Side Washers are easily assembled and mounted to
the tunnel floor. Once the equipment is assembled and in place, the ShineMitt™ cleaning material and
utility hook-ups can be performed to complete the installation of the SpinLite® Full Side Washers.
Please read the entire instruction manual before attempting to install the equipment and refer to it
throughout the installation process. Keep this manual as a guide to proper maintenance.
IT IS IMPERATIVE THAT WHEELS ARE SPINNING DURING
ANY PERIOD THAT THE CONVEYOR IS ACTIVATED
SpinLite® Full Side Washer
Driver Side Assembly
SpinLite® Full Side Washer
Passenger Side Assembly
Motor/Gearbox
& Cover
Hub Assembly
with LED Lights
ShineMitt™
Cleaning Material
Water
Manifold
Pivot Stop
Leg
Assembly
Arm Asy. with Drive
Shaft & Bearings
Hub Cover
Electrical
Junction Box

Table of Contents

Related product manuals