CURRENT REVISION LOG
1MANUL961 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
Updated front cover to new design
Updated Belanger logo throughout the entire manual
Changed Belanger Limited Warranty on Parts from 30 days to 90 days
Top image: Removed 47-1/2”
Bottom image: Changed the 47-1/2” dimension to 13” Conveyor: 47-1/2” & 14-1/2” Conveyor: 49”
(per Project #32-523)
Added page Installation: Identify Conveyor (per Project #32-523)
Added Note about the 13” Conveyor being shown in images in manual
Updated dimension to driver side Full Side Washer 13” Conveyor: 47-1/2” and 14-1/2” Conveyor: 49”
Added to note under image: (13” Conveyor: 47-12” / 14-1/2” Conveyor: 49”) (per Project #32-523)
Removed placement dimensions DS: 47-1/2”, PS 103-1/2”, and spacing dimension 78-1/2” for the
staggered QuickFire® Plus assemblies
Updated dimension to driver side Full Side Washer 13” Conveyor: 47-1/2” and 14-1/2” Conveyor: 49”
Added to note under image: (13” Conveyor: 47-12” / 14-1/2” Conveyor: 49”) (per Project #32-523)
For Stand-Alone Installation: added dimension for 13” Conveyor: 47-1/2” / 14-1/2” Conveyor: 49”
Added dimension information to Step 2 for the 13” & 14-1/2” wide conveyors (per Project #32-523)
Removed placement dimensions DS: 47-1/2”, PS 103-1/2”, and spacing dimension 78-1/2” for the
staggered QuickFire® Plus assemblies
For Staggered with QuickFire® Plus Installation: added dimension for 13” Conveyor: 47-1/2” / 14-1/2”
Conveyor: 49” for placement of driver side SpinLite® Full Side Washer
Added dimension information to Step 2 for the 13” & 14-1/2” wide conveyors ( per Project #32-523)
Changed Motor/Gearbox from 1GEABX-AS660 to 112271 and 1GEABX-AS661 to 112272 (per
Project #10037)
Updated back cover to new design
To Next Page
Loading...
