Bender ISOMETER IRDH575 - COM SETUP Menu: BMS Interface; Bus Address Setting; ISO Monitor Function

Operation and setting
76
IRDH575_D00089_05_M_XXEN/01.2020
6.9.3 ISOnet
Use this menu item to activate the ISOnet function of an IRDH575.
Refer to page 24 for an ISOnet description.
6.9.4 Diagram COM SETUP
1. Exit
2. Addr: XXX
3. ISONet: off
4. ISO Monitor
Addr: XXX
****IT-SYSTEM****
R > 010 MW
- EDS: off -- auto --
******************
ADR: 001
.
.
.
ADR: 030
****IT-SYSTEM****
R >123 kW ADR: 01
1. EXIT
2. HISTORY INFO
3. ISO SETUP
4. ISO ADVANCED
5. EDS SETUP
6. EDS 460/490
7. EDS 470
8. COM SETUP
9. PASSWORD
10. LANGUAGE
11. SERVICE
ISOnet : off
off
on