Bender ISOMETER IRDH575 User Manual

Technical data IRDH575
95
IRDH575_D00089_05_M_XXEN/01.2020
9.2 Standards, approvals and certifications
The ISOMETER® was designed under consideration of the following standards:
- DIN EN 61557-8 (VDE 0413-8): 2015-12
- DIN EN 61557-8 Ber 1 (VDE 0413-8 Ber 1): 2016-12
- IEC 61557-8: 2014
- IEC 61557-8: 2014/COR1: 2016
- DIN EN 61557-9 (VDE 0413-9): 2015-10
- IEC 61557-9: 2014
Subject to change! The specified standards take into account the edition valid
until 01.2020 unless otherwise indicated.

Bender ISOMETER IRDH575 Specifications

General

Brand	Bender
Model	ISOMETER IRDH575
Category	Measuring Instruments
Language	English