Bender ISOMETER IRDH575 User Manual

Operation and setting
41
IRDH575_D00089_05_M_XXEN/01.2020
6.1.2 Display in the menu mode
6.1.3 Function keys
Two functions are assigned to each function key. In addition to the basic func-
tion marked with a circle, the keys allow navigation within the menu.
7
= Polarity of the test current pulse
. = valid RS-485 traffic
H = a new entry is made in the memory data base
C = flashing, if the clock has to be set
8
Messages:
- Insulation fault
- Connection system?
- Connection PE?
- Device error x
- ****STANDBY*****
Parameter change is permitted
Parameter change is blocked,
enabling by a password
1. EXIT
2. HISTORY INFO
3. ISO SETUP
4. ISO ADVANCED

Bender ISOMETER IRDH575 Specifications

General

Brand	Bender
Model	ISOMETER IRDH575
Category	Measuring Instruments
Language	English