1 Bender Operation Manual
Revision 90196
BendPak®
INCORPORATED
Bend-Pak®
INCORPORATED
FORWARD THIS MANUAL TO ALL
OPERATORS. FAILURE TO OPERATE
THIS EQUIPMENT AS DIRECTED HEREIN
MAY CAUSE INJURY
OPERATION AND SERVICE MANUAL
“America’s Most Popular
Tubing Bender”
Models:
1000-BL 1302-BL (“Blue Bullet”)
1000-BAS 1302-BAS
1000-BA 1302-BA
1502-BL
1502-BAS
1502-BA
Model 1502-BA
shown with typical
tooling package.
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes to the pur-
chaser upon receipt from the carrier. Consequently, claims
for material damaged in shipment must be made by the
purchaser against the transportation company at the time
shipment is received.
BE SAFE
Bend-Pak, Inc. benders are designed and built with safety
in mind. However, your overall safety can be increased by
proper training and thoughtful operation on the part of the
operator. DO NOT operate or repair this equipment without
reading this manual and the important safety instructions
shown inside.
1645 Lemonwood Drive
Santa Paula, CA 93060 U.S.A.
Tel: 805-529-3675
Fax: 805-529-2909
To Next Page
Need help?
General
