3 Bender Operation Manual
YOUR NEW BENDER
This instruction manual has been prepared especially for you.
Your new bender is the product of over 25 years of continuous research, testing and
development and is the most technically advanced bender on the market today.
READ THIS ENTIRE MANUAL BEFORE OPERATION BEGINS.
The manner in which you care for and maintain your bender will have a direct effect on
it's overall performance and longevity.
RECORD HERE THE FOLLOWING INFORMATION WHICH IS LOCATED AT THE
FRONT END OF YOUR MACHINE.
Serial No. _________________
Model No. _________________
Manufacturing date __________
Bender Operation Manual 3
WARRANTY
Your new bender is warranted for two years on equipment structure; one year on
all operating components and tooling to the original purchaser, to be free of defects
in material and workmanship. The manufacturer shall repair or replace at their
option for this period those parts returned to the factory freight prepaid which prove
upon inspection to be defective. The manufacturer will pay labor costs for the first
l2 months only on parts returned as previously described.
This warranty does not extend to defects caused by ordinary wear, abuse,
misuse, shipping damage, or lack of required maintenance.
This warranty is exclusive and in lieu of all other warranties expressed or implied.
In no event shall the manufacturer be liable for special, consequential or incidental
damages for the breach or delay in performance of the warranty. The manufacturer
reserves the right to make design changes or add improvements to its product line
without incurring any obligation to make such changes on product sold previously.
Warranty adjustments within the above stated policies are based on the model
and serial number of the equipment. This data must be furnished with all
warranty claims.
WARRANTY IS NOT VALID UNLESS
WARRANTY CARD IS RETURNED
To Next Page
Loading...
