52
Step 3 Set cursor to the No. line by using the
/ keys set.
Fig. 6.8: Delete results menu
Use the / keys to select the function for which you want to view results. The selec-
ted measurement result is shown when the TEST key is pressed, and it is deleted when
the TEST key is pressed again. Deletion can be aborted - without deleting the selected
results - by pressing the MEM key once or several times.
How to delete saved results under the same structure item:
Step 1 To enter the Memory menu press the MEM key.
By using the
/ keys set cursor to DELETE RESULTS.
Press the TEST key, the following menu is displayed:
Fig. 6.9: Delete results menu
Deleting measurement results from the 3rd structure level (FUSE)
Step 2 By using the / keys set cursor to FUSE line. Use the / keys to enter the desi-
red element FUSE xx.
In No. line the number of saved results is displayed.
Fig. 6.10: Deleting results from the 3
rd
level
Continue with instructions under Step 3.
Deleting measurement results from the 2rd structure level (BLOCK)
By using the / keys set cursor to OBJECT line. Use the / keys to enter the
desired element OBJECT xxx
In No. line the number of saved results in the 1st structure level is displayed.
Fig. 6.11: Deleting results from the 2nd level
To Next Page
Loading...
