• Even if you turn on the camera, the battery will continue to charge if there is a USB
connection with a computer. In this case, however, back lamp operation will change as
described below.
Back Lamp Operation
IMPORTANT!
• Charging is not performed while the connected computer is in the hibernate mode.
• A charging error can occur immediately after charging begins or some time after charging
begins. A charging error is indicated by the back lamp flashing red.
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates remaining
power as shown below.
Lamp Status Description
Lit Red Charging
Flashing Red
Abnormal ambient temperature, charging taking abnormally
long, or battery problem
Lit Green Charging complete
Remaining Power High Low
Battery Indicator
Downloaded From camera-usermanual.com BenQ Manuals
To Next Page
Loading...
Need help?
General
