61
When performing any type of upgrade DO NOT do any of the following:
• Power off or press the reset button on the Host or Button.
• Close the browser window of the web management interface.
Failure to follow these warnings will result in rmware upgrade failure and subsequent product failure.
• Upgrading the Button’s Firmware
You can upgrade the Button’s rmware using an upgrade le located on your local computer or
directly from your Host via the connection between the Button and Host.
To upgrade the Button’s rmware using an upgrade le located on your local computer follow the
steps below:
1. Select from a local le in the Firmware File eld and then click the Select File button.
2. Navigate to and select the rmware upgrade le.
3. Select the Button you want to upgrade and then click the Firmware Upgrade button in the
Upgrade selected InstaShow X button eld.
To Next Page
Loading...
