BenQ SL490 - Page 81

OSD Menu 77
Power Save
Power save modes
Mode 1: DC off -> Power off. LED: Red.
Power Save -> Power off, LED: Red
Mode 2: DC off -> Power off, LED: Red.
Power Save -> Power Saving. LED: Orange. Can be wake up.
Mode 3: DC off -> Back light off, LED: Red
Power Save -> Back light off, LED: Orange. Can be wake up.
Mode 4: DC off -> Back light off, LED: Red
Power Save -> Will not enter power save mode. show “no signal”
only.
• When Auto FW update is not OFF, display will work under Mode3 for FW
update, but OSD item will not change.
• Please set to Mode 3 / 4 to wake up the display via MDA LAN control if this
function is desired.
Mode 3
DC OFF:
• Backlight off only
Power Save:
• Backlight off only
Mode 1 (default)
DC OFF:
• Power Off
Power Save:
• Power Off
Mode 4
DC OFF:
• Backlight off only
Power Save:
• No signal (Backlight On)
Mode 2
DC OFF:
• Power Off
Power Save:
• Power Saving
Power Save
Following table is the action for Android board with different
power mode.
DC off/on : press power button by RC
Power mode
in OSD
Mode 1/2 Mode 3/4
DC off shutdown 1. The current source
APK(such as
MediaPlayer, Browser,
PDF, X-Sign or Custom)
will be closed.
2. Android system will go
to the default black
launcher.
DC on Boot up Android system reboots