OSD (On-Screen Display) menu36
English
Adjusting the contrast
1. Set the contrast to the highest level.
2. Gradually decrease the contrast level until you reach the point where the
details in the bright areas of the image can be seen clearly. Do not further
decrease the contrast level to avoid losing the saturation of colors.
Adjusting the brightness
1. Set the brightness to the lowest level.
2. Gradually increase the brightness level until you reach the point where the
details in the dark areas of the image can be seen clearly. Do not further
increase the brightness level to avoid the black areas from looking grayish.
Setting up the Personal Picture Mode
You can adjust the settings in the Picture menu and save them as your
Personal Picture Mode.
1. Press
MENU to display the OSD menu on-screen.
2. Press
+ or - to select Picture, and then press OK to enter the Picture menu.
3. Press or to select
Picture Mode, and then press + or - to select
Personal.
4. Press or to select
Contrast, Brightness, Color, Sharpness..., etc.,
and then press
+ or - to adjust the settings to your satisfaction.
5. Press
MENU to save the settings and close the OSD menu.
V32B_V37B_EN.book Page 36 Wednesday, January 23, 2008 10:55 AM
To Next Page
Loading...
