BENSHAW RSi GX Series User Manual

145
8 - Troubleshooting & Maintenance
Keypad
Display
Protective Function Description
Parameter save error
Displayed when user-setting parameters fails to be
entered into memory.
Inverter hardware fault
Displayed when an error occurs in the control circuitry
of the drive.
Communication
Error
Displayed when the drive cannot communicate with
the keypad.
Remote keypad
communication error
Displayed when the drive and remote keypad do not
communicate with each other. It does not stop drive
operation.
Keypad error
Displayed after the drive resets the keypad when a
keypad error occurs and this status is maintained for a
certain time.
Cooling fan fault
Displayed when a fault condition occurs in the drive
cooling fan.
Instant cut off
Used for the emergency stop of the drive. The drive
instantly turns off the output when the EST terminal is
turned on.
Caution:The drive starts to regular operation when
turning off the EST terminal while FX or RX terminal
is ON.
External fault A contact
input
When multi-function input terminal (I20-I24) is set to
19 {External fault signal input: A (Normal Open
Contact)}, the drive turns off the output.
External fault B contact
When multi-function input terminal (I20-I24) is set to
19 {External fault signal input:B (Normal Close
Contact)}, the drive turns off the output.
Operating method when
the frequency command
is lost
When the drive operation is set via Analog input
(0-10V or 0-20mA input) or option (RS485) and no
signal is applied, operation is done according to the
method set in I62 (Operating method when the
frequency reference is lost).
FAn
ESt
EtA
Etb
__L
EEP
rErr
COM
HWt
Err

BENSHAW RSi GX Series Specifications

General

Brand	BENSHAW
Model	RSi GX Series
Category	DC Drives
Language	English