BENSHAW RSi GX Series User Manual

•
To move from the F15 to function group 2
4.2.2
How to Change the Codes in a Group
•
Code change in Drive group
•
Code Jump
When moving from parameter "F 0" to "F23" directly.
38
4 - Operation
1
In F15, press the left (t) or right (u) key. Pressing the key goes to the
first code of the group.
2
The 1st codein function group 1 "F0" is displayed.
Press the right arrow (u) key.
3
The 1st code in function group 2 “H 0” will be displayed.
F15
H0
F0
1
In the 1st code in Drive group “0.00”, press the Up (p) key once.
2
The 2nd code in Drive group “ACC” is displayed.
Press the Up (p) key once.
3
The 3rd code “dEC” in Drive group is displayed.
Keep pressing the Up (p) key until the last code appears.
4
The last code in Drive group “drC” is displayed.
Press the Up (p) key again.
5
Return to the first code of Drive group.
z Note: Use Down (q) key for the opposite order.
0.00
ACC
dEC
drC
0.00
1
Press the Ent () key in “F 0”.
2
1 (the code number of F1) is displayed. Use the Up (p) key to set to 3.
3
“03” is displayed by pressing the Left (t) key once to move the cursor
to the left. The numeral having a cursor is displayed brighter. In this
case, 0 is active. Use the Up (p) key to set to 2.
4
3 is set.
Press the Ent () key once.
5
Moving to F 23 has been complete.
z Note: Function group 2 and I/O group are settable with the same setting.
F0
1
F23
03
23

BENSHAW RSi GX Series Specifications

General

Brand	BENSHAW
Model	RSi GX Series
Category	DC Drives
Language	English