•
Protect from moisture and direct sunlight.
•
Do not install the drive in any environment where it is exposed to waterdrops, oil mist,
dust, etc. Install the drive in a clean place or inside a “totally enclosed” panel any
suspended matter is not entered.
•
When two or more drives are installed or a cooling fan is mounted in a panel, the drives
and fan must be installed in proper positions with extreme care to keep the ambient
temperature below the permissible range.
•
Install the drive using appropriate sized screws or bolts to insure the drive is firmly
fastened.
z Note: Take caution on proper heat ventilation when installing drives and fans in a
panel.
21
3 - RECEIVING AND INSTALLATION
Drive
GOOD (O)
BAD (X)
Drive
Cooling fan
Panel Panel
Drive
Drive
[When installing several drives in a panel]
Ventilating fan
GOOD (O )
BAD (X)
[When installing ventilating fan in a panel]
Risk of Electrical Shock
More than one source of power may be present. More
than one disconnect switch may be required to
de-energize the equipment before servicing.
CAUTION
To Next Page
Loading...
