EasyManua.ls Logo

Bernette b38 - 3-Step Zigzag; Overlock Stitch

Bernette b38
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
3-step zigzag
Stitch pattern: Mode 1 : 6
Mode 2 : 06
Thread tension: 3 - 6
Presser foot: Zigzag foot
This stitch is used to nish seams on synthetics and other fab-
rics that tend to pucker. The stitch is also excellent for darning
and mending tears.
Place your fabric to allow a 5/8˝ (1.5 cm) seam. Trim excess
close to stitching. Be careful not to cut the stitches.
This stitch is used to simultaneously seam and overcast edges
of fabrics.Use this stitch when you do not need to open seams
at.
Place the fabric edge next to the black guide and sew.
Overlock Stitch
Stitch pattern: Mode 1 : 8
Mode 2 : 08
Thread tension: 3 - 7
Presser foot: Overlock foot
PLEASE NOTE:
Stitch width should be set between 4.5 and 7.0.
The blue shank needle is recommended for stretch mate-
rials.

Table of Contents

Related product manuals