Bernette b38 - Balance

66
Balance
The sewing results of the stretch patterns may vary depending
upon the sewing conditions, such as sewing speed, type of the
fabric, number of layers etc.
Always test sew on a scrap piece of the fabric that you wish to
use.
If stretch patterns are distorted, correct it with the balance.
Balance
Stretch stitch pattern (Example: Stitch pattern 40
40
in mode 3)
If the pattern is compressed, turn the balance in the direction of
“+”.
If the pattern is drawn out, turn the balance in the direction of “–”.
Stitch balance of buttonhole 26.
If the right row is denser, turn the balance in the direction of “+“.
If the left row is denser, turn the balance in the direction of “-“.
•Evenness of Bartack
If the stitch does not meet the start position, turn the balance in
the direction of “+“.
If the stitch does not meet return position, turn the balance in the
direction of “–”.