Bernette b38 - Stitch Adjustment of Programmed Patterns

64
Stitch Adjustment of Programmed Patterns
The stitch width and length of the programmed stitch pattern can
be altered uniformly or individually.
Example: To alter the stitch width uniformly.
Enter the mode 3.
Select pattern 67 (
67
).
Press the memory button.
Select pattern 67 (
67
).
Press the mirror image button.
Press the memory button.
Move the cursor to the right of the last programmed pattern.
Press the stitch width button to alter the stitch width (5,0).
A pattern series will be sewn.
The stitch width of programmed patterns will be uniformly
altered.
• 2JEŦA@JAA@HALKOEPEKJ
The needle position of the programmed patterns will vary
depending on the combination:
Unified to the left when combining the patterns with the left
needle position (
70
) and the center needle position (
67
).
Unified to the right when combining the patterns with the
right needle position (
67
flipped) and the center needle posi-
tion (
67
).
Unified to the center when combining the patterns with the
left needle position (
70
) and the right needle position
(
67
flipped).
Unified to the center when combining the patterns with the
left
(
70
), right (
67
flipped) and center needle positions (
67
).