Bernette b38 - Fringing; Drawn Work

52
Fringing
Stitch pattern: Mode 3 : 04
Thread tension: 3 - 6
Presser foot: Satin stitch foot
Fringing adds a special touch on table linens and shawls.
Choose a firm, woven fabric like linen where threads can be
removed easily.
Carefully cut the fabric on the grain. Remove a single
strand of yarn or thread where the fringing is to begin.
Drawn Work
Stitch pattern: Mode 3 : 04
Thread tension: 3 - 6
Presser foot: Satin stitch foot
Drawn work uses the same method as fringing. Choose a firm,
woven fabric like linen where threads can be removed easily.
Carefully cut the fabric on the grain. Determine the width
of the drawn work and remove one strand of yarn or fabric
thread at each end.
Sew down the left side so the right hand stitches fall in the
open space.
Remove all excess yarn located to the right of the stitching
and create a fringe.
Sew down the left side, guiding the fabric so the right hand
stitches fall in open space. After finishing the left side, turn
the fabric around 180°. Sew down the other side.
Remove the yarn or fabric threads between the stitching.