EasyManua.ls Logo

Bernette b38 - Patchwork Piecing; Stippling Stitch

Bernette b38
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
Stippling Stitch
Stitch pattern: Mode 3 : 38
Thread tension: 3 - 6
Presser foot: Satin stitch foot
Open toe foot: F2
* Stitch pattern 37 in mode 3 can also be used.
A pre-programmed stippling stitch is a fast and easy method to
quilt small areas.
Place a batting (wadding) between quilt top and backing fabric.
Patchwork Piecing
Stitch pattern: Mode 3 : 01 and 28
Thread tension: 3 - 6
Presser foot: Zigzag foot
Place the patchwork pieces right sides together. Select
pattern 01 in mode 3. Sew a precise 1/4˝ (0.6 cm) seam
allowance.
Wrong side of the fabric
Right side of the fabric
Select pattern 28 in mode 3.
Press the seam allowance to open. Sew stitch pattern 28 on
the right side of the garment centering over the seam line.
* Stitch patterns 40 46 or 48 in mode 3 can also be used.
Angle scale on the stitch plate.
You can easily seam patchwork pieces at the desired angles
without marking, by using the unique angle scales on the stitch
plate.
The angle scales are marked at 45, 60, 90 and 120 degrees.

Table of Contents

Related product manuals