Bernette b38 - Keyhole Buttonhole; Stretch Buttonhole; Antique Buttonhole

44
Keyhole Buttonhole
Stitch pattern: Mode 2 : 24
Thread tension: 1 - 5
Presser foot: Buttonhole foot with slide
Sewing procedure is the same as standard buttonhole. Use the
seam ripper and an eyelet punch
to open the buttonhole.
Eyelet punch
The stitch width can be varied from 5.5 to 7.0.
To change the stitch width or stitch density, refer to page 43.
* An eyelet punch is an optional item.
Stretch Buttonhole
Stitch pattern: Mode 2 : 25
Thread tension: 1 - 5
Presser foot: Buttonhole foot with slide
The machine will sew the front bartack and left row first.
The machine will sew the back bartack, the right row and will
stop automatically.
The stitch width can be varied from 2.5 to 7.0.
The stitch density can be varied from 0.5 to 1.0.
To change the stitch width or stitch density, refer to page 43.
Antique Buttonhole
Stitch pattern: Mode 2 : 26
Thread tension: 1 - 5
Presser foot: Buttonhole foot with slide
The machine will sew the front bartack and left row first.
The machine will sew the back bartack, the right row and will
stop automatically.
The stitch width can be varied from 2.5 to 7.0.
The stitch density can be varied from 0.5 to 2.5.
To change the stitch width or stitch density, refer to page 43.