13
Preparation
Foot Control
LED Sewing Light
The LED sewing light illuminates the sewing area with no
shadows and has a very long service life.
A
B
C
(USA/Canada only):
Use only foot controller type LV1 or WFC1
with sewing computer model 820.
A defective sewing light must only be
replaced by a technician.
Take the sewing computer to your
BERNINA dealer.
Sewing Speed
► sewing speed is controlled by pressure on the foot
control
Raise or Lower the Needle
► entire foot rests comfortably on Foot Pedal
► tap the Foot Control with your heel to raise or lower the
needle
Cable tidy
► wind the cable around the reel
► insert the cable end (plug) into A
When sewing
► unwind the cable to the desired length and slip into B
or C
To Next Page
Loading...
