38
Setup Program
Sewing
The tension alteration affects all stitches and
is saved even when the sewing computer is
switched off.
Automatic Securing Program
► the number and type of the securing stitches can be
programmed
► standard = four securing stitches in the same place
► select function 4 for forward securing stitches
► 3-6 securing stitches can be programmed
Automatic Thread Cutter
► if function 5 is activated, the upper and lower thread are
automatically cut after sewing
Raise Presser Foot
► if function is activated 6 the presser foot is raised after
securing
► if function is not activated, the presser foot stays down
5 6
1
2
3
4
Motor Speed
► alter maximum sewing speed 1
► the number in the bar is the stitches per minute; the
basic value is indicated by a dark bar
Thread Tension
► alter the basic setting (0) of the upper thread tension 2
by plus or minus 20%
0 = basic settings
Securing stitches on/off
► function 3 is active = standard
► if the automatic thread cutter is used to cut the threads,
4 securing stitches will be stitched when resuming
sewing
► function is inactive = no securing stitches will be stitched
To Next Page
