88
Practical Applications
Practical Stitches
Straight Stitch no. 1
Straight Stitch
► after turning the sewing computer on, the Practical
Stitch screen with the activated straight stitch appears
► for specialty work, program the seam length using the
stitch counter function, see page 34
Application
► suitable presser foot to be selected according to the
technique, e.g. manual darning
► suitable for all fabrics
Basting Stitch no. 21
Basting Stitch
► straight stitch, sews out every fourth stitch, i.e. longest
stitch possible is 24mm when the stitch length is set at
6mm. Recommended stitch length is 3.5 - 6mm
► for all work where a very long stitch is required
► quick and easy basting of seams, hems, quilts, etc.
► easy to remove
Preparation
► pin work horizontally to basting direction to prevent the
layers slipping
► Reverse pattern foot no. 1C/1D
► Reverse pattern foot no. 1C/1D
Adjust the stitch length to suit the fabric
For example, use a longer stitch length
(approximately 3 - 4mm) with denim, a
shorter length (2 - 2.5mm) with batiste.
Adjust the stitch length to suit the thread
For example, use a longer stitch length
(approximately 3 - 5mm) when using cordon-
net thread for topstitching.
Activate Needle Stop Down
Prevents the fabric from slipping when you
stop to adjust or pivot project.
Securing/fixing the thread
► sew a few basting stitches at the beginning
and end of a seam
Basting
► use a fine darning thread for basting as it is
easier to remove
To Next Page
Loading...
