EasyManua.ls Logo

Bernina 820 - Combi Mode for Stitch Combinations

Bernina 820
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
64
Decorative Stitches
► select desired stitch
► the stitch appears in the Stitch Altering Area
► select next stitch
► continue in this manner until the desired combination is
complete
► correcting in a combination, see page 84
► saving a combination, see page 81
Combi Mode
Combining Practical and Decorative Stitches
Example of a Stitch Pattern Combination
► touch stitch pattern no. 407 once
► touch stitch pattern no. 607 once
► touch stitch pattern no. 750 once
► sew combination, the patterns alternate continuously
Example of a Stitch Pattern and Function
Combination
► touch stitch pattern no. 427 once
► touch stitch pattern no. 402 once and activate «left/right
Mirror Image» function
► sew the combination, the patterns alternate, original
and mirrored
► select Combi Mode
► Combi Mode is opened, allowing you to create pattern combinations
Complete combination mirrored sideways
► touch the «Multifunction» icon
► touch the «Mirror image (left/right)» icon
► the whole combination is mirrored left/right
Add the Securing function
There are various options for securing stitch
patterns automatically:
► touch securing function before starting to
sew = pattern combination is secured at the
beginning
► to program the securing function within a
pattern combination = the stitch patterns
are secured accordingly
Most of the practical and decorative stitches
can be combined. With the exception of these
special programs:
Securing programs
► No. 5, No. 1324
Basting stitch
► No. 21
Darning program
► No. 22
Bartacks
► No. 24, No. 25
Fly stitch
► No. 27
Stitch programs in the buttonhole
category:
► No. 51-63
032298.53.04_1204_B820_EN

Table of Contents