92
Practical Applications
Edge Finishing
Narrow Edgestitching
Wide Edgestitching
There are three options for wide edge stit-
ching
► guide the folded edge along the edge of the presser foot
► guide the folded edge along the marks on the stitch
plate (for stitching 3/8” to 1” from the edge (1 to 2.5cm)
► insert the adjustable seam guide into the hole on the
back of the presser foot shaft
► adjust as desired
► tighten the screw
► guide the folded edge along the seam guide
► to sew parallel wider lines, guide the seam guide along
a previously sewn line of stitches
► Reverse pattern foot no. 1C
► Blindstitch foot no. 5
► Edge stitch foot no. 10/10C/10D (optional
accessory)
► foot no. 5:
use any left or far right needle position
► foot no. 1C and no. 10/10C/10D:
any needle position is possible
Outer Edges
► place edge of fold against the guide on the Blindstitch
foot
► select needle position at desired distance from the
folded edge
Hem Edges
► place edge of fold against the guide on the Blindstitch
foot (inside upper edge of hem)
► select needle position to the right to sew along the
upper edge
To Next Page
