EasyManua.ls Logo

Bernina 820 - Presser Foot and Securing Function Controls; Speed and Needle Position Adjustments

Bernina 820
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
Overview
Slide Speed Control
► the motor speed is infinitely
variable with the slide
Altering Needle Positions
► touch left button – the needle
moves to the left
► touch right button – the needle
moves to the right
► quick change – hold the button
down
► total of 11 needle positions
(5 left, 5 right, 1 center)
Stitch Width/Length (Multi-
function) Knobs
► to adjust stitch width or length
► to alter thread tension
► to alter presser foot pressure
► to adjust button size or the slit size
of the buttonhole
► to adjust the balance
Presser Foot Position
► touch the button = the presser foot is lowered
and raised slightly again so the fabric can be
easily positioned. When sewing starts the foot
is lowered on to the material
► touch the button again = the presser foot is
raised and the Feed-dog is simultaneously
lowered
Automatic Securing Program
► touch the button before the sewing starts or
during sewing = single patterns are secured at
the end, with the selected number of stitches
programmed
► touch the button before starting a combination
= the first pattern is secured at the end, with
the number of stitches programmed
► touch the button while stitching a combination
= the active pattern is secured at the end, with
the number of stitches programmed
► the sewing computer stops automatically after
all securing variations
► the number and type of the securing stitches
can be programmed in the setup program
032298.53.04_1204_B820_EN

Table of Contents