Beta ALP 200 - Brake Pedal; Gearchange Lever; Kickstart; Side Stand

2
OPERATION
20
EN
GEARCHANGE LEVER
Gearchange lever is fitted to the left side
of the engine.
The positions corresponding to the different
gears are shown in the figure.
BRAKE PEDAL
Brake pedal A is located in front of the
right-hand footrest.
KICKSTART
The kick-starter pedal is located on the
right side of the engine. The upper part is
rotatable. To start, depress the kick-starter
outward and with a quick movement down-
ward. The pedal will automatically return
upwards. After starting, manually fold the
pedal in the rest position.
SIDE STAND
Press down side stand with the foot and
lean the vehicle against it.
Ensure that the ground is solid and the
vehicle stands steadily.
The stand is fitted with a safety device. This
device results in the vehicle being switched
off if the stand is lowered when the same
is in gear.
1
2
3
4
5
N