Beta ALP 200 - Handle and Under-Saddle Shield Removal

5
BODY DISASSEMBLY AND REASSEMBLY
63
EN
1
1
REMOVAL AND REFITTING
OF THE UNDER-SADDLE
PLASTIC SHIELD
After removing the saddle, the tank cover
and the passenger handles, the under-
saddle plastic shield 2 can be removed.
Remove the screw indicated in figure.
Remove the under-saddle 1 towards the
rear of the motorcycle.
Reassemble proceeding in the reverse
order.
WARNING:
If these parts are improperly reassem-
bled, they might suddenly come off
while driving, and the driver might
lose control of the motorbike.
REMOVAL AND REFITTING
OF THE PASSENGER HANDLES
After removing the saddle it is possible to
remove the two passenger handles 1.
Remove the screws indicated in figure.
Remove the handles.
Reassemble proceeding in the reverse
order.
2