EasyManua.ls Logo

Beta ALP 200 - Prolonged Inactivity

Beta ALP 200
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
CHECKS AND MAINTENANCE
58
EN
PROLONGED INACTIVITY
A few simple operations should be performed to keep the vehicle in good condition
whenever it is to remain inactive for a long period (e.g. during the winter):
Thoroughly clean the vehicle.
Reduce the tyre pressures by approximately 30 percent, and if possible raise the
tyres off the ground.
Remove the spark plug and pour a few drops of engine oil into the spark plug hole.
Make the engine turn a few times by operating the kick-start (where available) and
then replace the spark plug.
Cover the unpainted parts, excepting the brakes and the rubber parts, with a film
of oil or spray silicone.
Ensure the battery is always charged.
Protect the vehicle with a dust cover.
Drain the carburetor tank as described on page 42.
AFTER PROLONGED INACTIVITY
Restore the tyre inflating pressures.
Check the tightening of all the screws having an important mechanical function.
Start the vehicle for the first time by means of the (kick-start).

Table of Contents

Other manuals for Beta ALP 200

Related product manuals