Beta ALP 200 - Select Button Function Instruction

2
OPERATION
25
EN
Press the Adjust button to switch from
Hour Meter B back to the main screen.
Press and hold the Adjust button for 3
seconds to reset the Hour Meter B
The main screen.
SELECT BUTTON FUNCTION INSTRUCTION
Press the Select button during main screen
to switch from Clock to Stopwatch.
Press and hold the Select button for 3 sec-
onds to change between 12/24hour mode.
NOTE: If 24hour mode is chosen, then
the AM/PM symbol will not be displayed.
Press the Select button to switch from
Stopwatch to Speed Record.
Press and hold the Select button for 3
seconds to reset the Stopwatch.
Press the Select button to switch from
Speed Record back to main screen.
Press and hold the Select button for 3
seconds to reset the Speed Record.
NOTE: If Engine Oil Light goes up, reset
the Engine Oil Light in this screen to re-
calculate the mileage.
NOTE: Average speed and the Max
speed display in the 3 seconds rotation.
The main screen.