EasyManua.ls Logo

Beta ALP 200 - Fume Collecting Tube; Petrol Fumes Exhaust Pipe

Beta ALP 200
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
CHECKS AND MAINTENANCE
39
EN
- Pour in the quantity of liquid indicated on
page 16.
- Screw on filler cap 1 again.
- Start the engine and run at idle for a few
minutes.
- Turn off the engine and wait for about
one minute, then check the level and top
up if needed.
WARNING:
Hot oil can cause severe burns!
ATTENTION:
Dispose of used oil in compliance with the
regulations in force.
FUME COLLECTING TUBE
Fume collecting tube A is located as shown
in the picture.
Should any oil be found in the tube, re-
move the cap at the lower end of the tube
and drain the oil, or the mixture of oil and
petrol, into a suitable container.
Note:
Empty the fume collecting tube every
3000 Km.
WARNING:
Disposal is to be made according to the
regulations in force.
1
A
B
A
PETROL FUMES EXHAUST
PIPE
Check the transparent pipe A periodically.
If petrol builds up, take cap B off and
drain it.

Table of Contents

Other manuals for Beta ALP 200

Related product manuals