EasyManua.ls Logo

Beta ALP 200 - Brake System Maintenance and Checks

Beta ALP 200
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
CHECKS AND MAINTENANCE
43
EN
WARNING:
Follow action on a cold engine.
WARNING:
Fire hazard! Fuel is highly flam-
mable.
Always stop the engine when
refuelling and keep open
flames and lighted cigarettes
away.
Immediately clean up any spilled
fuel.
FRONT BRAKE
CHECK THE LEVEL OF THE
FRONT BRAKE FLUID
Check the level of the brake fluid through
sight A. The level of the fluid should never
fall below the mark in the sight.
To restore the level of the brake fluid,
loosen the two screws 1, lift cap 2 and
add brake fluid until its level is 5 mm
below the upper rim of the reservoir.
Use the liquid indicated on page 16
in the “Recommended lubricants and
liquids” table.
WARNING:
The brake fluid is extremely corrosive.
Take care not to spill it on the paintwork.
2
1
A

Table of Contents

Other manuals for Beta ALP 200

Related product manuals