BIFFI F01-2000 ELECTRIC ACTUATOR
INSTRUCTION AND OPERATING MANUAL
INDEX
1 General safety instructions ������������������� 2
1.1 Range of application ................................. 2
1.2 Safety instructions for installation in
hazardous area ......................................... 2
1.3 Applicable standards and regulations ..... 3
1.4 Terms and conditions ............................... 3
1.5 Identification of the main parts ................ 3
2 Storage and pre-installation ����������������� 4
2.1 Tests to be carried out when
theactuatoris received ............................ 4
2.2 Storage procedure .................................... 4
2.3 Checks to be performed
beforeinstallation ..................................... 5
3 Installation �������������������������������������������� 5
3.1 Working condition ..................................... 5
3.2 Coupling block: disassembly from
theactuator ............................................... 5
3.3 Manual operation ...................................... 6
3.4 Mounting the actuator onto the valve ...... 7
3.5 Electrical connections .............................. 7
3.6 Removing the electrical enclosures’
covers ......................................................... 8
3.7 Cable entries ............................................. 8
3.8 Terminal board .......................................... 9
3.9 Instructions for the explosion-proof
enclosures ................................................. 9
3.10 Installation in environment with
explosivedusts ........................................ 10
4 Lubrication ������������������������������������������ 10
4.1 Lubrication inspection ............................ 10
5 Operating the F01-2000 ���������������������� 11
5.1 Operation by handwheel ......................... 11
5.2 Setting of mehanical stops ..................... 11
5.3 Electrical operation ................................. 12
5.4 Local control............................................ 12
5.5 Local indication ....................................... 12
5.6 Lock of the 3-position selector .............. 12
5.7 Remote control........................................ 13
5.8
Operating the F01-2000 for thefirsttime ..
14
5.9 Optional modules .................................... 14
5.10 Base card of the F01-2000 v4 ................. 16
GENERAL INSTRUCTIONS FOR INSTALLATION
OPERATION AND CONFIGURATION
MAINTENANCE AND TROUBLESHOOTING
SPARE PARTS AND DRAWINGS
VCIOM-01249-EN 17/12www�biffi�it Copyright © Biffi. All rights reserved.
To Next Page
Need help?
General
