September 2021
Installation, Operation and Maintenance Manual
VCIOM-01249-EN Rev. 0
44
Local Controls
Section 6: Local Controls
Nameplate
This menu includes a series of data identifying the actuator characteristics, service, and
utilization mode. The data are entered by the manufacturer and can only be viewed (i.e.,
this menu is only available in View mode).
List of routines:
• serial number
• actuator type
• torque/thrust
• actuator speed
• power supply
• motor data
• test date
• wiring diagram
• enclosure
• certicate
• lubricant
• revision
• torque sensor
Valve data
This menu includes a series of data relevant to the valve. The valve manufacturer and end
user should enter the data.
List of routines:
• tag name (max 28 characters)
• manufacturer (max 28 characters)
• break OP torque (max 28 characters)
• serial number (max 28 characters)
• break CL torque (max 28 characters)
• max stem thrust (max 28 characters)
• ange type (max 28 characters)
To Next Page
Loading...
