BIFFI F01-2000 User Manual

September 2021
Installation, Operation and Maintenance Manual
VCIOM-01249-EN Rev. 0
76
Set-Up Routines
Section 9: Set-Up Routines
9.3.6 Set Maintenance Date
The maintenance date routine allows the following operations:
• to set the last maintenance date
• to set the next maintenance date
• to set the start-up date
Conguration procedure
• Move the local selector to OFF and then simultaneously press OPEN and STOP.
Select the language and enter the password according to the instructions (see
“Entering the set-up mode”). When the message displayed is “SET-UP MODE OK?”
press YES. Press NO to scroll the list of available menus and then YES to select the
maintenance menu.
• Press NO to scroll the list of available routines and press YES to select
maintenance date.
• Press YES to set the last maintenance date. Press NO to skip to “next
maintenance date”.
Last maintenance date
• Press YES if the date is correct, press NO to change it.
• Enter day, month, and year. Press NO to scroll the list of available values, press YES
to select.
• Press YES if the date is correct.
Next maintenance date
• Press YES if the date is correct, press NO to change it.
• Enter day, month, and year. Press NO to scroll the list of available values, press YES
to select.
• Press YES if the date is correct.
Start-up date
• Press YES if the date is correct, press NO to change it.
• Enter day, month, and year. Press NO to scroll the list of available values, press YES
to select.
• Press YES if the date is correct.

BIFFI F01-2000 Specifications

General

Brand	BIFFI
Model	F01-2000
Category	Controller
Language	English