Big Backyard F23210 - Attach Swing Ground Stakes

 51 support@cedarsummitplay.com
Wood Parts
Hardware
Step 32: Attach Swing Ground Stakes
A:Driveone(0318)GroundStake10-1/2”intothegroundateach(1863)SWPostontheinsideoftheassembly
andattachwith2(S3)#8x2-1/2”WoodScrewspergroundstake.(g.32.1and32.2)
Warning! To prevent tipping and avoid potential injury, stakes must be
driven 10-1/2” into ground. Digging or driving stakes can be dangerous if
you do not check rst for underground wiring, cables or gas lines.
4 x #8 x 2-1/2” Wood Screw
S3
2 x Ground Stake 1-1/4 x 1-1/2 x 14”
0318
Fig. 32.1
S3
0318
Fig. 32.2
1863
10-1/2”InGround
1863