Big Backyard F23210 - Attach Ground Stakes

 31 support@cedarsummitplay.com
Step 14: Attach Ground Stakes
A:Drive3(0318)GroundStakes10-1/2”intothegroundat1(1931)Postand2(0369)LowerDiagonalsas
showning.14.1.Attachusing2(S3)#8x2-1/2”WoodScrewspergroundstake.(g.14.2)
MOVE FORT TO FINAL LOCATION. FINAL LOCATION MUST BE LEVEL GROUND
Warning! To prevent tipping and avoid potential injury, stakes must be
driven 10-1/2” into ground. Digging or driving stakes can be dangerous if
you do not check rst for underground wiring, cables or gas lines.
Hardware
Wood Parts
6 x #8 x 2-1/2” Wood Screw
S3
3 x Ground Stakes 1-1/4 x 1-1/2 x 14”
0318
Fig. 14.2
Fig. 14.1
10-1/2”In
Ground
0369
S3
0318
1931
0369