C (E3) 08/2015 page 83/93
19.8 Accessories and spare parts
BINDER GmbH is responsible for the safety features of the unit only, provided skilled electri-
cians or qualified personnel authorized by BINDER perform all maintenance and repair, and if
components relating to chamber safety are replaced in the event of failure with original spare
parts. The user is responsible for any risks arising from using unauthorized accesso-
ries/components.
Perforated shelf, stainless steel
Stacking adapter for direct, thermally decoupled stacking
Gas cylinder connection kit for CO
2
Calibration certificate for temperature and CO
2
Cleaning kit (neutral cleaning agent, disinfection spray and lint-free disposable
wipes), protective gloves and safety goggles
8012-0503
Neutral cleaning agent, 1 kg
Calibration of temperature and CO
2
including certificate
Spatial temperature measurement including certificate (2-5 measuring points)
Spatial temperature measurement including certificate (6-9 measuring points)
Spatial temperature measurement including certificate (10-18 measuring points)
Spatial temperature measurement acc. to DIN 12880:2007 including certificate
(27 measuring points)
DL020025
Shelf holder, stainless steel
Unit fuse 5x20mm 250V 10A semi time-lag (M) (C 170 230V)
Unit fuse 6.3 x 32 mm 250V 16A time-lag (T) (C 170-UL)
Temperature fuse class 1 measuring chamber
Temperature fuse class 1 unit
Temperature sensor Pt 100 straight (door heating)
Temperature sensor 2 x Pt 100 straight (inner chamber + safety controller)
Filter cap for CO
2
sensor
Power cable with IEC connector plug for EU
Power cable with IEC connector plug for Switzerland
Power cable with IEC connector plug for England
Power cable with IEC connector plug for USA
To Next Page
Loading...
